Suitable for Coal, Wood, Lignite, Briquette, Husk, Bagasses, Agro Waste & any Solid Fuel
1) Operating concept -
The high temperature Thermic Fluid Heater is a forced Circulation water tube design in which thermic fluid under pressure circulate though a set of nested coils while draft combustion gases travel across the coils. The hot gases envelop the entire tube surface making maximum use of both Radiant & convective heat to achieve very high heat transfer rates.
A circulating pump is selected to give the proper flow rate and pressure for each application to optimize motor horse power required while maintaining low film temp. to ensure long fluid life. Temperature controls monitor the output temperature and regulates the supply of fuel & air to the furnace to provide efficient combustion of the fuel.
2) Salient Features-
Excess Air Reduction: Radiant Heat Exchange above the furnace cooled. Hence, less excess air is required and ultimately increase efficiency.
Air preheating: combustion air from FD fan passes through air preheater that absorbs the waste heat in the fuel gases. It ultimately results into efficiency increase.
Balanced Draught System: It means reduction of infiltration of unwanted air though fire gates of minimum level. It results into maximum heat recovery from air preheater and assures greater efficiency.
Multifuel Option: Energy Thermopak is most suitable for Coal, Wood Waste, Bagasse, Lignite etc. for optimum level output with some modification in combustion chamber. Service is extended on client's demand.
No comments:
Post a Comment